Certificates - Nokia 5070 User Manual

W e b
Select Menu > Web
Security settings > Security module
settings and from the following
options:
Security module details
security module title, status,
manufacturer, and serial number
Module PIN request — to set the phone
to ask for the module PIN when using
services provided by the security
module. Enter the code, and select On.
To disable the module PIN request,
select Off.
Change module PIN — to change the
module PIN, if allowed by the security
module. Enter the current module PIN
code, then enter the new code twice.
Change signing PIN — to change the
signing PIN code for the digital
signature. Select the signing PIN you
want to change. Enter the current PIN
code, then enter the new code twice.
See also "Access codes", p. x.
68 Copyright © 2007 Nokia. All rights reserved.
> Settings >
— to show the

Certificates

Important: Even if the use of
certificates makes the risks
involved in remote
connections and software
installation considerably
smaller, they must be used
correctly in order to benefit
from increased security.
The existence of a certificate
does not offer any protection
by itself; the certificate
manager must contain
correct, authentic, or trusted
certificates for increased
security to be available.
Certificates have a restricted
lifetime. If Expired certificate
or Certificate not valid yet is
shown even if the certificate
should be valid, check that
the current date and time in
your device are correct.
Before changing any
certificate settings, you must
make sure that you really
trust the owner of the
certificate and that the
certificate really belongs to
the listed owner.