Phone; Connectivity; Infrared - Nokia 5070 User Manual

Send my caller ID (network service) >
, , or
Set by network Yes
Line for outgoing calls
service) — to select the phone line 1 or
2 to make calls, if supported by your
SIM card

■ Phone

Select Menu > Settings
from the following options:
Phone language — to set the display
and writing language
Memory status — to view the free
memory and the used memory in
Gallery, Messaging, and
Automatic keyguard
keypad of your phone to lock
automatically after a preset time delay
when the phone is in the standby mode
and no function of the phone has been
used. Select On, and set the time from
5 seconds to 60 minutes.
Security keyguard — to set the phone
to ask for the security code when you
unlock the keyguard. Enter the security
code, and select On.
When the keyguard is on, calls still may
be possible to the official emergency
number programmed into your device.
Cell info display > On
information from the network operator
depending on the network cell used
(network service)
Copyright © 2007 Nokia. All rights reserved.
No
(network
> Phone and
Applications
— to set the
— to receive
Welcome note — to enter a welcome
note to be shown briefly when the
phone is switched on
Operator selection >
set the phone automatically to select
one of the cellular networks available
in your area. With Manual, you can
select a network that has a roaming
agreement with your home network
operator.
Confirm SIM service actions
"SIM services", p. 71.
Help text activation
whether the phone shows help texts
Start-up tone — to select whether the
phone plays a start-up tone when the
phone is switched on

■ Connectivity

You can connect your phone to
compatible devices using an infrared
connection. You can also define the
settings for packet data dial-up
connections.

Infrared

You can send or receive data to or from
a compatible phone or data device
(for example, a computer) through the
infrared (IR) port of your phone. To use
an IR connection, the device with
which you want to establish a
connection must be IrDA compliant.
S e t t i n g s
Automatic — to
— See
— to select
39