Table of Contents
Advertisement
2
Using two people, lift and position the chassis until the
rack-mount flanges are flush with the rack post.
3
Align the holes in the flanges with the rack holes you
marked in step 1.
4
Once the holes are aligned, use a third person to insert
a screw through the bottom hole on each flange. Tighten
both screws until they are secure.
O m
TM
n iS
w it
c h
7 7
0 0
A
C M
M
1
2
N I
3
4
Note. Be sure to install the screws in the bottom hole of
each flange, as shown, before proceeding.
March 2005
B
PW
R
PS
1
PS
PS
2
3
5
6
N I
7
8
5
Once the screws at the bottom of each flange are
secure, install the remaining screws. Be sure that all
screws are securely tightened.
Optional Rack-Mounting Hardware
All OmniSwitch 7700/7800 switches are shipped with integral
front rack-mount flanges. These flanges support standard 19"
rack mount installations. If you have non-standard rack-mount
requirements, Alcatel offers optional hardware for the follow-
ing applications:
23" rack installations
•
Side-mount hardware for additional support
•
For information on this optional rack mounting hardware,
contact your Alcatel representative.
Installing the Hardware
9
Advertisement
Table of Contents
