Rack Mounting The Power Supply Tray - Alcatel OS6855-24 Hardware User's Manual

Mounting OS6855-24 and OS6855-U24/U24X
4
Carefully slide the power supply against the back of the chassis until the power connector securely
connects.
5
Tighten the captive screw for each power supply located at back of the power supply to the power
supply tray.

Rack Mounting the Power Supply Tray

The following section describes how to rack-mount a power supply tray and connect the power supply
with a cable.
1
Align the threaded holes in the provided rack-mount flanges with the holes in the power supply tray.
These holes are located on the left and right sides of the tray.
2
Attach the flanges to the tray using the provided Phillips-head screws. The screws slide through the
non-threaded holes from the inside of the power supply tray and are then attached to the mounting brack-
ets using the threaded holes. Be sure to tighten each of the screws firmly using a Phillips screwdriver.
OmniSwitch 6855 Series Hardware Users Guide
Attaching a Rack-Mount Flange
September 2011
Installing Power Supplies
page 3-7