Replacing The Camera - Lenovo C2 Series Hardware Maintenance Manual

For model C320 refer to the illustration below. (9 screws)
Step 17. Place the new motherboard into the chassis, aligning the screw holes in the motherboard with
the mounting holes in the chassis.
Step 18. Secure the new motherboard to the chassis using the screws.
Step 19. Attach all related components to the new motherboard.
Step 20. Reattach the EMI cover, the computer cover, the speaker cover, the hard disk drive cover and
the optical disk drive.

Replacing the camera

Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To replace the camera:
Step 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
.
Chapter 8 Replacing hardware
55