Navigating The Menus; Selecting A Channel; Adjusting The Volume; Viewing Program Information - Dynex DX-32L100A13 User Manual

20
DX-32L100A13

Navigating the menus

Remote Control 1
Press MENU to open the on-screen menu.
Press
screen or to adjust a selected item.
Press
Press ENTER to confirm a selection or
enter a sub-menu.
Press MENU to return to the previous menu.
Press EXIT to close the menu.
Remote Control 2
Press MENU to open the on-screen menu.
Press
Press MENU to return to the previous menu.
Press EXIT to close the menu.

Selecting a channel

To select a channel:
• Press CH+ or CH– to go to the next or previous
channel on the memorized channel list.
or to move the cursor on the
or to select menu options.
Press or to move the cursor on the
screen or to adjust a selected item.
or to select menu options.
Press ENTER to confirm a selection or
enter a sub-menu.
• Press the number buttons to enter the channel
number you want, then wait for the channel to
change or press ENTER to immediately change the
channel.
• To select a digital sub-channel, press the number
buttons to select the main digital channel, press
(dot), then press the number button for the
sub-channel. Wait for the channel to change, or
press ENTER to immediately change the channel.
• Press RECALL to go to the last viewed channel. Press
RECALL again to return to the channel you were
watching.
• Press CH-LIST to open the channel list, press
to highlight a channel, then press ENTER. Hidden
channels are grayed out on the Channel list.
• Press FAV or FAVORITE to open the favorite channel
list, press or
ENTER.
Note
If a list has more than one page, press
through the pages.

Adjusting the volume

To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the
volume.
• Press MUTE to turn off the sound. Press
again to turn the sound back on.

Viewing program information

To view channel information:
• Press INFO to view an information banner. The
information banner shows the current program
information such as channel number, video input
source, and resolution.
• Digital channel information—Displays the
channel number, station name, channel label,
broadcast program name, TV rating, signal type,
audio information, resolution, CC mode, current
time, and current program start and end times.
• Analog channel information—Displays channel
number, channel label (if preset), signal type,
audio information, and resolution.

Adjusting the picture

Adjusting the TV picture

To adjust the TV picture:
1
Press MENU. The on-screen menu opens with the
Picture menu displayed.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Reset Picture Settings
Move
2
Press or to highlight an option, press
adjust the setting, or press
sub-menu. You can select:
Adjusting the picture
to highlight a channel, then press
or
Picture Audio Settings Channels USB
Energy Savings
65
47
65
0
55
26
Select Back Exit
MENU EXIT
or
or ENTER to go to the
.
or
to scroll
MUTE
to