SAT
1
TV
R
TUNER
PC
DVI IN
AUDIO
TUNER
PC
AUDIO
CONNECTION/PREPARATION
Mounting the table base
Diagrams are contained in the assembly instructions enclosed with the
table base.
1
Fasten the two brackets to the table base using the hex socket
screws supplied.
Remove four fixing screws for each bracket from the back of the
2
device.
Place the stand on a level surface.
3
Put the device on top of the stand.
4
5
Fasten the stand to the device by screwing four screws to the
back of the device for each bracket.
Connecting the antenna and the mains cable
1
Plug the antenna cable of the rooftop antenna into the »TUNER«
antenna socket on the television.
Plug the mains cable supplied into the mains socket of the televi-
2
sion.
Plug the power cord into a wall socket.
3
Note:
Only plug the device into the mains socket after you have
connected the external devices and the antenna.
Only connect the television using the power cord supplied to a
suitable earthed safety socket.
Do not use an adapter plug or extension lead which does not
meet the applicable safety standards. Do not tamper with the
power cord.
2
__________
3
5