Products with a warranty sticker that is removed, torn or unreadable. Due to the weight of the cooler exceeding normal standards, please remove the cooler before computer transport to prevent damage to the cooler itself as well as prevent problems during installtion. GH-ESB21-TH - 5 -...
Apply an even layer of thermal paste on the surface of the installed CPU. Fig.2 Install the motherboard in the chassis. Align the GH-ESB21-TH Cooler with the screw holes and place it onto the motherboard. Before use, please remove the bottom protective layer of the cooler.
Page 7
(Note) The four screws can be screwed as below: Combination 1: A+C+D+F or Combination 2: B+C+E+F GH-ESB21-TH - 7 -...