Automatic Unlock Doors On Exit - Dodge Nitro 2010 Owner's Manual

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
4. A single chime will indicate the completion of the
programming.
5. Repeat these steps if you want to return this feature to
its previous setting.
NOTE: Use the automatic door locks feature in accor-
dance with local laws.

Automatic Unlock Doors on Exit

The doors will unlock automatically on vehicles with
power door locks if:
1. The automatic unlock doors on exit feature is enabled.
2. The transmission was in gear and the vehicle speed
returned to 0 mph (0 km/h).
3. The transmission is in NEUTRAL or PARK.
4. The driver door is opened.
5. The doors were not previously unlocked.
6. The vehicle speed is 0 mph (0 km/h).
Automatic Unlock Doors on Exit Programming
The automatic unlock doors on exit feature can be
enabled or disabled as follows:
For vehicles equipped with an Electronic Vehicle Infor-
mation Center (EVIC), refer to "Electronic Vehicle Infor-
mation Center (EVIC)/Personal Settings (Customer-
Programmable Features)" in "Understanding Your
Instrument Panel" for further information.
For vehicles not equipped with the EVIC, perform the
following procedure:
1. Close all doors and place the key in the ignition.
2. Cycle the ignition switch between LOCK and ON and
then back to LOCK four times, ending up in the LOCK
position.