Understanding Your Instrument Panel; Automatic Unlock Doors On Exit - Dodge Nitro 2011 Owner's Manual

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Automatic Door Locks Programming
The automatic door locks feature can be enabled or
disabled as follows:
For vehicles equipped with an Electronic Vehicle Infor-
mation Center (EVIC), refer to "Electronic Vehicle Infor-
mation Center (EVIC)/Personal Settings (Customer-
Programmable Features)" in "Understanding Your
Instrument Panel" for further information.
For vehicles not equipped with the EVIC, perform the
following procedure:
1. Close all doors and place the key in the ignition.
2. Cycle the ignition switch between LOCK and ON/
RUN and then back to LOCK four times, ending up in the
LOCK position.
3. Press the power door LOCK switch to lock the doors.
4. A single chime will indicate the completion of the
programming.
5. Repeat these steps if you want to return this feature to
its previous setting.
NOTE: Use the automatic door locks feature in accor-
dance with local laws.

Automatic Unlock Doors On Exit

The doors will unlock automatically on vehicles with
power door locks if:
1. The automatic unlock doors on exit feature is enabled.
2. The transmission was in gear and the vehicle speed
returned to 0 mph (0 km/h).
3. The transmission is in NEUTRAL or PARK.
4. The driver door is opened.
5. The doors were not previously unlocked.
6. The vehicle speed is 0 mph (0 km/h).