Gigabyte GA-F2A55M-DS2 User Manual page 31

& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
& CPU Vcore/Dram Voltage/+3.3V/+5V/+12V
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/System FAN Speed
Displays current CPU/system fan speeds.
& CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS
will emit warning sound. Options are: Disabled (default), 60
& CPU/System Fan Fail Warning
Allows the system to emit warning sound if the CPU fan or system fan are not connected or fail. Check the
fan condition or fan connection when this occurs. (Default: Disabled)
& CPU Fan Speed Control
Allows you to determine whether to enable the CPU fan speed control function and adjust the fan speed.
Allows the CPU fan to run at different speeds according to the CPU temperature. You can
Normal
adjust the fan speed with EasyTune based on your system requirements. (Default)
Allows the CPU fan to run at slow speeds.
Silent
Allows you to control the CPU fan speed under the Slope PWM item.
Manual
Allows the CPU fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the CPU fan speed. This item is configurable only when CPU Fan Speed Control is
set to Manual. Options are: 0.75 PWM value /
& System Fan Speed Control
Allows you to determine whether to enable the system fan speed control function and adjust the fan speed.
Allows the system fan to run at different speeds according to the system temperature. You
Normal
can adjust the fan speed with EasyTune based on your system requirements. (Default)
Allows the system fan to run at slow speeds.
Silent
Allows you to control the system fan speed under the Slope PWM item.
Manual
Allows the system fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the system fan speed. This item is configurable only when System Fan Speed Control
is set to Manual. Options are: 0.75 PWM value /
C/140 F, 70 C/158
o o o
C ~ 2.50 PWM value / C.
o o
C ~ 2.50 PWM value / C.
o o
- 31 -
F, 80 C/176 F, 90 C/194 F.
o o o o o