Carburetor Adjustment; High Altitude Operations - Echo EA-410 Operator's Manual

CarbureTor adjusTmenT

Engine Break-In
New engines must be operated a minimum duration of two tanks of fuel
break-in before carburetor adjustments can be made. During the break-
in period your engine performance will increase and exhaust emissions
will stabilize. Idle speed can be adjusted as required.
High Altitude Operation
This engine has been factory adjusted to maintain satisfactory starting,
emission, and durability performance up to 1,100 feet above sea level
(ASL) (96.0 kPa). To maintain proper engine operation and emission
compliance above 1,100 feet ASL the carburetor may need to be ad-
justed by an authorized ECHO service dealer.
IMPORTANT
If the engine is adjusted for operation above 1,100 feet ASL, the
carburetor must be re-adjusted when operating the engine below
1,100 feet ASL, otherwise severe engine damage may result.
Level 2.
Parts required: None.
NOTE
Every unit is run at the factory and the carburetor is set in compli-
ance with emission regulations. This carburetor does not have accel-
eration and high speed adjustment needles.
1. Check idle speed and reset if necessary. Idle speed screw (A)
should be set to the specifications found on page 24, "Specifica-
tions" of this manual. Turn idle screw (A) clockwise to increase
idle speed; counter-clockwise to decrease idle speed.
wArning
When carburetor adjustment is completed, the cutting attachment
should not turn at idle, otherwise serious personal injury may
result.
E a
arth
O ' M
pEratOr s
21
ugEr
anual
A