Default Passwords - Vista Quantum EVO Installation And User Manual

Quantum EVO H.264 installation and user manual

DEFAULT PASSWORDS

Front Panel
A Password is required if you need to: Log on; enter the menus; down power; stop recording
or changing an IP setting.
Logging ON
Before the system can be used it is necessary to Log On as a user, he rights of each user
can be managed by an administrator level log on
Press MENU on the front panel, or right click and select the MENU icon. The following box
will be displayed played asking for password.
The default Password is:
To select a different use press the Select key in the centre of the unit, use the up and down
arrows to choose, then press the Select key again to confirm. Then enter this users
password.
Viewer Software
When using the supplied Viewer software, the default logon details are:
User ID is "admin" (not case sensitive).
Password is "00000000" i.e. 8x Zero‟s
(Admin ID cannot be changed, as this is the full administrator ID)
00000000 (8 zeros)
Click on arrow to view a quick connection
address book for the last
the software has been connected to.
This uses the description to quickly identify
each unit.
17
22 units that