Enabling Do Not Disturb - Polycom SoundPoint IP 650 User Manual

User Guide SoundPoint IP 650

Enabling Do Not Disturb

Note
3 - 22
3. Using and
then press the Select soft key.
4. Press the Disable soft key to turn off call forwarding.
The idle display returns and the regular icon appears as the line indicator.
Dynamic Forwarding
To forward an incoming call to another party:
1. With the phone ringing, press the Forward soft key.
2. Enter a number to forward the incoming call to.
3. Press the Enable soft key.
The incoming call is forwarded to the other party. If call forwarding is
disabled, all future calls will not be forwarded and forwarding will remain
disabled.
Press to prevent the phone from ringing on incoming calls. A
flashing icon and text on the graphic display indicates that Do Not Disturb is
on.
Calls received while Do Not Disturb is enabled are logged in the Missed Calls
list unless configured to be forwarded to another party by your system
administrator.
To disable Do Not Disable, press
This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.
, select the forwarding type you want to change and
again.