Echo Instruction Manual Instruction Manual page 15

wHen engine is HaRD TO sTaRT
WARNING
Clutch engages and chain may rotate when engine is started
with throttle lock button engaged. Do not start engine before
chain brake is locked.
1. Ensure that there is fuel and chain oil in the tanks.
2. Move chain brake lever fully forward to lock chain brake
before starting.
3. Lay unit on a flat, clear area and keep bar and chain clear of
all obstacles.
4. Press throttle control lockout down, squeeze throttle trigger,
and push in throttle lock button (D).
5. While depressing the throttle lock button, release the throttle
trigger and then release the lock button.
6. turn switch (a) to "RUn" position (I).
7. Pull starter handle.
NOTE
Do not pull starter rope out to the maximum possible position.
Do not allow recoil handle to snap back against the casing.
• after starting the engine, immediately squeeze and then
release throttle trigger to release throttle lock button,
otherwise severe brake damage may occur.
• never use throttle lock button for cutting.
• Use the throttle lock button only in starting.
NOTICE
Do not increase engine speed while chain brake is locked.
severe brake damage will result.
CAUTION
D
A
15