Advertisement
Using a coin, undo the yellow fastener
1
to remove the quick release window.
Check for blockage at the bottom of the
duct and underneath the soleplate.
If the brushbar is obstructed, a loud ratchet warning noise will be heard. Pull the cleaner away and it will automatically re-set itself.
For thread removal, unplug cleaner and carefully cut away threads from brushbar.
1
If ratchet warning noise continues, stop
1
vacuuming, turn off the machine and
unplug. To free the brushbar, lie the
machine on its front to reveal the soleplate.
Blockages and brushbar
Unplug your cleaner before carrying out any maintenance.
2
1
Remove wand from hose and look
2
down the wand to check for daylight.
Locate blockage removal cassette catch
at base of hose location.
2
Using a coin, undo the three yellow
2
fasteners.
Remove soleplate and clear the
3
brushbar obstruction.
Blockage removal
cassette catch
3
Pull back catch, remove cassette and
3
check for blockage. To replace, position
at 45
Remove Cyclone assembly to check
4
Cyclone entry and duct.
3
To replace brushbar, align and locate
4
in slots. Rotate until the end caps click
into place. Rotate brushbar to allow belt
to centralise, then replace soleplate.
Cyclone entry
duct
4
0
and click catch back into place.
End cap of brushbar
4
Raised section
Advertisement
