Siemens extractor hood Operating And Installation Manual page 30

Display
Status line
Settings areas
Direction of rotation display
Standard settings
NOTE
30
The display is divided into different areas:
The Status line indicates the time, the selected fan mode and
the information text.
The settings areas indicate suggested values which you can
change. The active settings area is lit.
By pressing the relevant Function button, you can change
from one settings area to the next.
b
= Turn rotary selector to the right
c
= Turn rotary selector to the left
If both direction arrows
rotary selector in either direction.
Before switching on the appliance, always follow the
instructions and warnings in the chapter entitled "Safety
instructions".
If required, set the language for the text display.
German has been preset.
The changes to the standard settings will not take effect until
the extractor hood has been switched off.
Each change can be saved by holding down the t button or
deleted by pressing the
d
are displayed, you can turn the
w
button.