Gigabyte G1.ASSASSIN 2 User Manual page 72

Recovering your system using the original Windows installation disk:
In case Windows or your hard drive has serious errors, use the original Windows installation disk for system recovery.
Steps:
1. Restart your computer to boot from the original Windows installation disk.
2. When the Windows installation screen appears, select your language and click
3. Select Repair your computer.
Restore your computer using a system image that you created earlier and then click Next.
4. Select
5. Select the backup you want to use and then follow the on-screen instructions to complete.
For further instructions, refer to the Help file of Smart Recovery 2.
SMART DualBIOS
SMART DualBIOS is a new feature that can record personal passwords and important dates,
and remind users of the dates. It also stores the recorded data in the main and backup BIOS
simultaneously, which can prevent loss of the data in case the system/hard drive fails.
Unique Features
Recovering your system with Smart Recovery 2 (Windows 7 only):
Steps:
System Recovery button on the main menu.
1. Click the
2. Select the partition where your backup is saved.
3. Use the time slider to select a time point.
4. Select a partition backup created on the selected time point and
click Restore.
5. Confirm whether to restart your system to proceed with the restore
immediately or later. Once you respond "Yes" the system will restart to
the Windows recovery environment. Follow the onscreen instructions
to restore your system.
For Windows Vista, refer to the steps below to use the original
•
Windows installation disk for system recovery.
All of your files and programs will be deleted and replaced with those
•
on the selected backup. If needed, be sure to make a copy of your
data before the restore.
Instructions:
Enter the Smart 6 password to launch the SMART DualBIOS utility. You
™
can record personal passwords and important dates and set reminders
of these dates. Click Save to save the settings and click Exit to exit.
- 72 -
Next.