Gigabyte G1.ASSASSIN 2 User Manual page 11

Storage Interface 2 x Marvell 88SE9172 chips:
Š
- 2 x SATA 6Gb/s connectors (GSATA3 6/GSATA3 7) supporting up to 2 SATA
6Gb/s devices
- 2 x eSATA 6Gb/s connectors (eSATA/USB Combo) on the back panel
supporting up to 2 SATA 6Gb/s devices
- Support for RAID 0 and RAID 1
USB Chipset:
Š
- Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, including 2 eSATA/
USB Combo, 6 ports available through the internal USB headers)
2 x Fresco FL1009 chips:
Š
- Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 8-pin ATX 12V power connector
Š
4 x SATA 6Gb/s connectors
Š
4 x SATA 3Gb/s connectors
Š
1 x CPU fan header
Š
4 x fan headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
3 x USB 2.0/1.1 headers
Š
1 x USB 3.0/2.0 header
Š
1 x Clear CMOS jumper
Š
1 x Trusted Platform Module (TPM) header
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
Connectors 1 x CPU overclocking button
Š
1 x BIOS switch button
Š
1 x Clear CMOS button
Š
1 x optical S/PDIF Out connector
Š
6 x USB 2.0/1.1 ports
Š
2 x USB 3.0/2.0 ports
Š
2 x eSATA/USB Combo connectors
Š
1 x RJ-45 port
Š
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker
Š
Out, Line In/Mic In, Line Out)
I/O Controller iTE IT8728 chip
Š
- 11 - Hardware Installation