Technical Information; Inserting A Pause; Connecting To A Switchboard - Motorola D1001 User Manual

Technical Information

How many telephones can I have?
All items of telephone equipment have a Ringer Equivalence
Number (REN), which is used to calculate the number of items
which may be connected to any one telephone line. Your
D1000 has a REN of 1. A total REN of 4 is allowed. If the total
REN of 4 is exceeded, the telephones may not ring. With
different telephone types there is no guarantee of ringing, even
when the REN is less than 4.
Any additional handsets and chargers that you register have
a REN of 0.
R&TTE
This product is intended for use within Singapore for
connection to the public telephone network and compatible
switchboards.
This equipment complies with the essential requirements for
the Radio Equipment and Telecommunications Terminal
Equipment Directive 1999/5/EC including compliance with
ICNIRP standard for electromagnetic energy exposure.

Connecting to a switchboard

This product is intended for use within Singapore for
connection to the public telephone network.
General information

Inserting a pause

With some switchboards, after dialling the access code you
may have to wait for a moment while the switchboard picks
up an outside line so you will need to enter a pause in the
dialing sequence.
#
Press and hold to insert a pause (P) before entering the
telephone number.
You may also need to enter a pause when storing
international numbers or charge card numbers.
Recall
You may need to use the recall function if you are connected
to a switchboard/PABX (Private Automatic Branch
Exchange), contact your PABX supplier for further
information.
41