Axis 540+ User Manual page 33

Section 3: Basic Installation
32
Methods for setting
the IP Address
You can set the IP address using one of the following methods,
depending on your network operating environment:
Method
AXIS IP Installer
DHCP
ARP
RARP
BOOTP
AXIS NetPilot
The ARP and RARP methods operate on single network segments
Notes:
only, that is they cannot be used over routers.
Refer to Setting Parameters, on page 91 for information about
setting the IP address in the Macintosh environment.
AXIS 540/640 User's Manual
Network environments
Windows 95/98/NT/2000
Windows NT/2000, UNIX,
NetWare 5, OS/2
Windows 95/98/NT/2000, OS/2
UNIX
UNIX
UNIX, NetWare 5, OS/2
Windows 95/98/NT/2000,
NetWare 5
See ...
page 34
page 35
page 36
page 38
page 40
page 42
Basic Setup with
AXIS NetPilot, on
page 27