Advertisement
A
Power (On/Off) switch. Controls only the DC circuit. There is a separate mains
A
PSU for single kits. Systems have a combined Aerial Distribution Amplifier and
Power Supply.
B
RF Level. Indicates the strength of the RF (radio) signal.
C
Diversity Operation. Shows which aerial is in use.
AF Level. Indicates the audio output.
D
E
Channel selector switch.
VHF systems have 6 frequencies.
UHF systems have a 16 channel switch, but only 12 frequencies are
available. Channels 13 -16 are repeats of other frequencies.
F
Channel information panel. Shows channel available and their frequencies.
BNC Aerial connector.
G
6.25mm Jack socket output. Unbalanced.
H
3 pin XLR output. Balanced.
J
K
Output gain control for Jack and 3-XLR outputs.
DC input.
L
Receivers
B
C
G
H
J
D
E
K
L
G
F
Advertisement
