Rinnai RIN80E24 Owner's Manual page 4

Location
The water heater should be located as
close as possible to the most frequently
used hot water outlet. Adequate
access must be made for service to the
element, thermostat, relief valve and
anode. Ensure that the data plate is
clearly visible.
Note: All models are equipped with a
sacrificial anode, accessible through the
top cover. Allow 50% of the height of
the water heater for clearance above to
replace the anode.
2
80L to 400L Electric Storage Water Heaters
Installation Details
We recommend a plinth be installed
under the water heater where the
water heater is subjected to wet
conditions.
A properly drained overflow tray must
be used where property damage could
occur from water spillage. (See AS/
NZS3500.4.2 for further details.)
When installing this water heater in a
roof area as a mains pressure unit, refer
to local regulations.
Note: The warranty does not cover
damage due to leakage of the water
heater.
RIN0421
Owner's Manual
023335 Rev. A