Operations; Basic Operations - Clarion CZ200E Owner's Manual & Installation Manual

5. OPERATIONS

Basic Operations

Note:
• Be sure to read this chapter referring to the
chapter "3. CONTROLS"
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume
raised to the maximum level may harm
your hearings.
Be careful about adjusting the volume.
Power on / off
Notes:
• Start the engine before using this unit.
• Be careful about using this unit for a long
time without running the engine. If you
drain the car's battery too far, you may not
be able to start the engine and this can
reduce the service life of the battery.
1. Start the engine. The power button / knob
illumination on the unit will light up.
2. Press the [ ] key on the front panel to
turn on the power under standby mode.
The unit goes back to the last status after
power on.
3. Press and hold the [
panel to turn off the power under work
mode.
Volume adjustment
Turn the volume knob on the front panel.
The adjustable range of volume is 0 to 40.
Engine ON
position
] key on the front
CAUTION
While driving, keep the volume level at
which external sounds can be heard.
Playing source selection
Press [SRC] key on the front panel
repeatedly to choose desired playing source.
Notes:
1. Playing source selection means selecting
work mode, such as DISC mode, Radio
mode, Aux mode, etc.
2. When some devices are not ready, they
cannot be selected.
Display system time
Press the [ADJ] key on the front panel to
switch the display information between RDS
information, system time and playing source.
9
/ /