Power Management Setup - Gigabyte GA-A75N-USB3 User Manual

2-7

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Soft-Off by Power button
USB Wake Up from S3
Modem Ring Resume
PME Event Wake Up
HPET Support
(Note)
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC Back Function
Power-On by Alarm
x Date (of Month)
x Resume Time (hh:mm:ss)
ErP Support
hi: Move Enter: Select
F5: Previous Values
Soft-Off by Power button
&
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off Press the power button and then the system will be turned off instantly. (Default)

Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power

button is pressed for less than 4 seconds, the system will enter suspend mode.
USB Wake Up from S3
&
Allows the system to be awakened from ACPI S3 sleep state by a wake-up signal from the installed USB
device. (Default: Enabled)
Modem Ring Resume
&
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a modem that
supports wake-up function. (Default: Disabled)
PME Event Wake Up
&
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a PCI or PCIe
device. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB
lead. (Default: Enabled)
HPET Support
(Note)
&
Enables or disables High Precision Event Timer (HPET) for Windows 7/Vista operating system.
(Default: Enabled)
Power On By Mouse
&
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled Disables this function. (Default)

Double Click Double click on left button on the PS/2 mouse to turn on the system.

(Note) Supported on Windows 7/Vista operating system only.
BIOS Setup
Power Management Setup
[Instant-off]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
Enter
[Soft-Off]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 44 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults