Table of Contents
Advertisement
Operating Instructions
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer's visit is not free of
charge, even during the period of guarantee.
...Error messages are displayed.
• If the programme indicator for the selected wash programme is
flashing and fault code (1 or (2 is displayed on the multi-display,
you can probably rectify the fault yourself.
After rectifying this fault, press the button for the wash programme
that has been started. The wash programme continues. If the fault
code is displayed again, contact customer service.
• For all other faults, please contact customer service, stating the fault
code.
Malfunction
Fault code (1 is dis-
played on the multi-
display.
The programme indica-
tor for the selected
wash programme is
flashing:
there is no water run-
ning into the dish-
washer.
Fault code (2 is dis-
played on the multi-
display.
The programme indica-
tor for the selected
wash programme is
flashing.
Fault code (3 is dis-
played on the multi-
display.
28
Possible Cause
Tap is blocked or furred with
lime-scale.
The filter (where present) in
the threaded hose fitting at
the water inlet valve is
blocked.
The water inlet hose is not
correctly laid.
The siphon is blocked.
The water drain hose is not
correctly laid.
The leak prevention system
has been triggered.
Remedy
Clean tap.
Clean the filter in the
threaded hose fitting.
Check hose installation.
Clean siphon.
Check hose installation.
Close the tap and contact
customer service.
Hide quick links:
Advertisement
Table of Contents
