Table of Contents
Advertisement
Operating Instructions
Adjust the water softener
To avoid the scale deposits on the dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content, water. The dish-
washer therefore has a built-in water softener, in which tap water from
a hardness of 4 °d (German degree) is softened with the aid of special
salt.
You water supplier will be able to inform you on the hardness and
3
hardness range of the water in your area.
Adjust the water softener to the setting given in the table that corre-
0
sponds to the hardness of the water in your area. The water softener
can be adjusted in 10 steps.
1
in °d
)
41-50
35-40
31-34
27-30
23-26
19-22
15-18
11-14
4-10
under 4
1)(°d) German degree, measure of the hardness of water
2)(mmol/l) millimol per litre, international unit for the hardness of water
*factory setting
0
1. The dishwasher must be switched off.
2. Press the function and water softener buttons simultaneously and keep
them pressed
3. In addition press the ON/OFF switch A.
The LED indicators for the function and water softener buttons flash.
4. Press the softener button again.
The multi-display indicates the hardness setting.
5. Pressing the water softener button increases the hardness setting by 1.
(Exception: hardness setting 0 follows hardness setting 9).
10
Water Hardness
2
in mmol/l
) Range
7.3-9.0
6.3-7.2
5.5-6.2
IV
4.8-5.4
4.1-4.7
3.3-4.0
III
2.6-3.2
1.9-2.5
II
0.7-1.8
I/II
under 0.7
Adjust
to Hardness Setting
9
8
7
6
5
4
3*
2
1
0
I
no salt necessary
Indication on the
Multi-Display
H 9
H 8
H 7
H 6
H 5
H 4
H 3
H 2
H 1
H 0
Hide quick links:
Advertisement
Table of Contents
