Water Outlet Connection - AEG ÖKO FAVORIT 5470 VI Operating Instructions Manual

Aeg dishwasher
Table of Contents

Advertisement

Water outlet connection

The end of the drain hose can be connected as follows:
- to the sink outlet siphon, securing it if necessary with a clip;
- to a wall outlet provided with vent-hole, minimum internal diameter 4 cm.
The waste connection must be at a height of between 30 cm (minimum) and
100 cm (maximum) from the floor.
It makes no difference which way the drain hose faces, either to the right or
left of the dishwasher.
Avoid bending or kinking the hose as this could prevent or slow down the
discharge of water.
Never connect to a waste disposal unit.
Extension hoses
The necessary extension hoses can be obtained from your local Service Force
Centre.
The extension hose must be no longer than 2 metres and its internal
diameter must be no smaller than the diameter of the hose provided.
Likewise the internal diameter of the couplings used for connection to the
waste outlet must be no smaller than the diameter of the drain hose.
Arrange the extension hose horizontally along the floor and allow it to rise
only where it is to be connected to the drain.
+ 2 m max
CS05
36

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents