Table of Contents
Advertisement
Cleaning the HEPA filter
Turn the lid of the dirt container anti-
clockwise to remove the lid. Then turn
the separator clockwise to remove
filter from the dirt container lid.
Clearing blockages
Hose blockages
The flexible hose may be disconnected from the
vacuum cleaner. Carefully remove any blockages
found and reconnect the hose securely.
TurboTool blockages
Locking ring
Locking ring
Slide off the locking ring.
vax.co.uk
IMPORTANT: It is very important to keep the filters clean to maintain
maximum performance of the vacuum. Vax recommend that your filters
should be cleaned at least every 3 months (depending on the level of
use). Do not use detergent to clean the filters.
Remove the HEPA central filter
from the separator.
Accessory blockages
Remove accessory from the hose. Carefully remove
the blockage and return to the cleaner.
Detach lower housing and remove
blockage.
Tap the HEPA central filter against a bin
and wash it under running water (max
40
c. Dry thoroughly (24 hrs) before
0
returning filter to the unit.
Tabs
To re-assemble the TurboTool, ensure
that the tabs are engaged and pivot the
lower housing closed. Slip the locking
ring over the neck of the TurboTool and
into the groove to secure.
9
Advertisement
Table of Contents
