See Maintenance; Clearing Blockages. IMPORTANT: Cleaning filters maintains vacuum performance. Vax recommends that your filters should be checked and cleaned at least every 3 months (depending on the level of use). If your filters are washable make sure they are completely dry before inserting back into the vacuum cleaner.
Getting started PLEASE READ SAFETY INFORMATION BEFORE USE (PAGE 3) Assembling your upright Using a crosshead screwdriver, Slide the handle down onto the Return the screw and tighten, remove the screw from the back of main body of the unit. securing the handle into the main the unit as shown.
Page 5
Attaching the TurboTool holder Attach the TurboTool holder to handle. Then fit the Turbotool to the TurboTool holder. vax.co.uk...
IMPORTANT: When the vacuum cleaner is stood in the upright position, or when using the hose and tools, the brush bar height adjust must be set to the highest position. vax.co.uk...
Looking after your machine Emptying and cleaning the dirt container Always switch off the appliance and unplug the mains socket before carrying out any maintenance. Press dirt container release button Hold dirt container over a bin and to remove the dirt container. press the dirt container latch to open, allowing dirt to fall out.
IMPORTANT: It is very important to keep the filters clean to maintain Cleaning the HEPA filter maximum performance of the vacuum. Vax recommend that your filters should be cleaned at least every 3 months (depending on the level of use). Do not use detergent to clean the filters.
Page 10
Looking after your machine Replacing the belt Turn unit over and remove the Remove the brushbar cover from Lift the brush bar out of the base of six screws using a crosshead the base of the unit. the unit. Next, remove the belt from screwdriver as indicated by arrows.
Page 11
• Hose blockages: remove the hose from the unit. Carefully remove any blockages found and reconnect hose securely. • Accessory blockages: remove accessory from handle/tube. Carefully remove blockage and re-attach to the vacuum cleaner. • The accessory may be faulty. Simply call us on 0844 412 8455 for assistance. vax.co.uk...
Service & Help Any queries or concerns about using your Vax, simply visit; vax.co.uk/support - vaxireland.ie or, call the Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.