Oven Carriage Door - AEG Electrolux B4105-5 User Manual

30
Cleaning and Care
Fastening the heating element
1. Guide the heating element back to the oven
roof.
2. Pull the heating element forwards against the
spring pressure and guide over the raised part
of the inner wall of the oven.
3. Engage in the retaining bracket.
Important: The heating element must lie on
both sides above the raised part of the oven in-
ner wall and be properly engaged.

Oven carriage door

The oven carriage door of your appliance can be taken off its hinges for cleaning.
Removing the oven carriage door
1. Pull the oven carriage out towards you.
2. Grasp the oven carriage door with both hands
at the sides.
3. Pull the oven carriage door vertically upwards
out of its guide rods.
Important: Do not pull the over carriage up
by the door handle.
Lay the oven carriage door with the outer side
facing downwards on a soft and level surface,
for example, a blanket, in order to prevent
scratches.