Table of Contents
Advertisement
You can insert two tapes in
your Dual-Deck VCR and have
them play sequentially or in a
continuous loop. For example,
you may rent a movie that
comes on two videotapes and
watch them seamlessly one
after the other. You may also
set two sales or training tapes
to loop continuously.
1
Open "Setup Menu"
Press and hold the menu button on the
remote control for 3 seconds.
2
Select "Dual-Deck Features"
Press 4.
3
Set "Playback Mode"
Press 2 repeatedly to set Playback Mode to:
• Normal — Tapes play normally (default
setting).
• Seq (Sequential) — The tape in Deck 1
will play to the end, then the tape in
Deck 2 will play to the end.
• Loop — The tape in Deck 1 will play to
the end, then the tape in Deck 2 will play
to the end. While Deck 2 is playing, the
tape in Deck 1 will rewind to the begin-
ning. This process will repeat continu-
ously until you press Stop on the deck in
Play.
Sequential/Loop Playback
SETUP MENU
1
Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/
= Move
= Sel
MENU=Quit
DUAL-DECK FEATURES
1
Remote Eject
On
2 : Playback Mode
Normal
3 : Auto Play / Rewind
Both
4 : Panel Display
Auto
5 : Screen Display
Auto
6 : Deck1 Hi-Fi
On
7 : Deck2 Hi-Fi
On
____________________________________
/
= Move
= Sel
MENU=Quit
DUAL-DECK FEATURES
1 : Remote Eject
On
Normal
2
Playback Mode
Normal
Seq
3 : Auto Play / Rewind
Both
Loop
4 : Panel Display
Auto
5 : Screen Display
Auto
6 : Deck1 Hi-Fi
On
7 : Deck2 Hi-Fi
On
____________________________________
/
= Move
= Sel
MENU=Quit
47
PLAYBACK FEATURES
Advertisement
Table of Contents
