Table of Contents
Advertisement
Tuner Band
Broadcast television comes
into your home in one of two
ways: over the air via antenna,
or through a cable via a local
CATV (Community Antenna
Television) provider or Satel-
lite. The Tuner Band setting
allows you to specify which
source you are using. Use this
setting only if Auto Setup
detected the incorrect band,
i.e. channels are coming in on
the wrong channel numbers.
1
Open "Setup Menu"
Press and hold the Menu button for 3 seconds.
2
Select "Tuner & Channel List"
Press 3.
3
Set "Tuner Band "
Press the right arrow repeatedly to switch the
Tuner Band among:
• Auto — Automatically detects Tuner Band.
• Antenna — Indicates that you are using an
indoor or outdoor VHF/UHF antenna.
• Cable — Indicates that you are using CATV
(Community Antenna Television), i.e. cable
TV.
4 - Tuner & Channel List
SETUP MENU
1
Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/
= Move
= Sel
MENU=Quit
TUNER AND CHANNEL LIST
CH ##
Tuner Band
Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels
No
Tuner Audio
Stereo
____________________________________
/
= Move
= Sel
MENU=Quit
TUNER AND CHANNEL LIST
CH ##
Auto
Tuner Band
Auto
Antenna
Auto Channel Search
Cable
Add Channel
Remove Channel
Show Weak Channels
No
Tuner Audio
Stereo
____________________________________
/
= Move
= Sel
MENU=Quit
29
TUNER AND CHANNEL LIST
Advertisement
Table of Contents
