Optional Equipment Connections - GoVideo DVR 4200 User Manual

Connections (Continued)

Optional Equipment Connections

Note
You can listen to DVD audio through the COAXIAL
(C) or AUDIO OUT (A2) connectors. The TV tuner
and VCR will still be listened to via the RF.OUT (R) or
DVD/VHS AUDIO OUT (A1) jack
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT (or DVD/VHS
AUDIO OUT) jacks on the DVD+VCR to the audio left
and right in jacks on your amplifier, receiver, or stereo
system, using the supplied audio cables (A1, A2).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS
(DVR4250 only))
Connect the DVD+VCR's DIGITAL AUDIO OUT
1 1
jack (COAXIAL X) to the corresponding input jack
on your amplifier. Use an optional digital
(coaxial X) audio cable.
You will need to activate the DVD+VCR's digital
2 2
output. (See Digital Audio Output on page 20).
Digital Multi-channel sound
Using the digital coaxial connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD+VCR (MPEG 2,
Dolby Digital and DTS (DVR4250 only)). Check the
receiver manual and the logos on the front of the receiv-
er to confirm its capabilities. If your receiver only has an
optical digital connector, adapters are available to con-
vert coaxial to optical.
Notes
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver may
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the on-
screen display, press AUDIO on the remote control.
– Due to the DTS Licensing agreement, the digital out-
put will be in DTS digital out when DTS audio stream
is selected (DVR4250 only).
14
Rear of DVD+VCR
A1
L R
AUDIO INPUT
Amplifier (Receiver)
.
Accessory Audio/Video (A/V) Connections to
DVD+VCR
Connect the source to the audio/video input connectors
on the front or back of the unit, using an optional
audio/video cable set.
Accessory Component:
VCR, Camcorder,
Video Camera,
Satellite Receiver,
Laser Disc Player
Jack panel of Accessory
AUDIO
OUTPUT
R
L
VIDEO
OUTPUT
Rear of DVD+VCR
A2 X
COAXIAL
DIGITAL INPUT
OR
Front of DVD+VCR