Rear Panel - GoVideo DVD/VCR Combo User Manual

Rear Panel

DVD/VHS OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV or A/V receiver with video
VHS IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, Another VCR).
AC Power Cord
Plug into the power source.
Connect to a TV with RF coaxial inputs.
Connect this terminal to the S-Video Input on a
ANTENNA INPUT
Connect the VHF/UHF/CATV antenna to this
and audio inputs.
terminal.
RF OUT(DVD/VHS OUT)
S-VIDEO OUT (DVD OUT)
TV or A/V Receiver.
COMPONENT VIDEO OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
VIDEO OUT (DVD OUT)
Connect to a TV with video input.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
COAXIAL (DVD digital audio out jack)
Connect to digital (coaxial) input on
audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier,
receiver, or stereo
system.
11