Timer Recording - GoVideo DV1130 User Manual

VCR Operation (Continued)
Use V V to choose the SPEED option.
1 1 0 0
Use b b /B B to choose the desired recording
speed (AUTO, SP or EP).
AUTO mode determines how much tape is left and
automatically switches from SP to EP, if necessary,
to complete recording of the program. There will be
some picture and sound distortion at the point of the
speed change.
Use V V to choose the REPEAT option.
1 1 1 1
Use b b /B B to choose the desired repeat (ONCE,
WEEKLY or DAILY).
ONCE event....for recording a single event.
WEEKLY event....for recording an event on a certain
day every week.
DAILY event....for recording an event at the same time
Monday through Friday.
ip
If the input data is wrong, use v v to select the data
and correct it using b b /B B .
Press MENU. The program will be memorized
1 1 2 2
by the DVD+VCR.
The indicator lights on the front panel display.
If the program time has past, the PAST TIME PRO-
GRAMMED message will appear on the TV screen.
Return to the incorrect program and program it with
the correct time.
If you have entered a past date, the timer recording
will be performed on that date of the next year.
Additional programs may be entered by repeating
steps 1-12.
Cable Users: If your cable hookup is via a TV
converter box, you can program multiple recordings
only on the converter box output channel. This is
because the converter determines what channel you
view through your DVD+VCR.
ip
If you are finished programming and you want to set the
DVD+VCR to record the programs you have entered,
MAKE SURE YOU HAVE INSERTED A TAPE INTO THE
DVD+VCR. The DVD+VCR is now set to record the preset
programs.
otes
If the power fails or the DVD+VCR is unplugged from the AC
outlet, the correct clock time and timer settings are kept in
memory for approximately 3 seconds. After 3 seconds, the
clock and program timer must be reset when power is
restored. Reset the clock according to the instructions.
After setting up a timer recording, recording will start if no other
timer recordings are scheduled to occur at the same time (see
"Program Priority" at right).
24
Checking (Erasing) Timer Record
Programming
Programming can be checked whenever the DVD+VCR
is turned on.
1 Press MENU to display the MAIN menu.
2 Use v/V to choose the PROGRAM menu.
Press ENTER and the PROGRAM menu will appear.
3 Use b/B to select a program you want to check or
erase. If you want to erase the program, press
CLEAR.
4 Press MENU to return to the TV screen.
Program Priority
Program number 1 is finished. The first part of Program
number 2 will not be recorded. Likewise, Program num-
ber 3 will not be recorded until Program number 2 is fin-
ished, and so on.
If the starting and ending
times of two or more timer
recordings overlap on the
same day, priority is given to
the earliest recording. For
example, in the diagram at
left Program number 2 will
not be recorded until