Troubleshooting - GoVideo 525p User Manual

Govideo user's guide dvd player 525p
Table of Contents

Advertisement

Troubleshooting

Troubleshooting
Before requesting service for the portable DVD player, check the chart below for a possible cause of the
problem you are experiencing. Some simple checkups or a minor adjustment on your part may eliminate the
problem and restore proper operation.•
SYMPTOM
No power.
Player does not start
playback when PLAY is
pressed.
Player starts playback but
stops immediately.
No picture.
No sound.
Distorted sound.
No audio from Digital
Output.
Distorted picture.
Completely distorted picture
or no color in picture.
Picture distorted during
forward or reverse scan.
No forward or reverse scan
playback.
No 4:3 (16:9) picture.
Remote control does not
function.
DVD player and remote
control keys not functioning.
Playback does not start
when Title is selected.
Audio sound track and/or
subtitle language not
selected.
No subtitles.
Alternative audio sound
track (or subtitle) languages
cannot be selected.
Angle cannot change.
REMEDY
• Insert AC adapter plug securely into power outlet.
• Check if Power button on right side of player is pressed in.
Power
Power button on right side of player is pressed in.
• Check power at AC outlet by testing another appliance.
• Condensation has formed: wait ~1-2 hours to allow player to dry out.
• Player cannot play discs other than DVDs, Audio CDs, MP3 CDs, and Photo CDs.
• Check if disc is defective by trying another disc.
• Check region (local) code.
• Disc may be dirty and may require cleaning.
• Ensure that disc is installed with label side up.
• Ensure that equipment is connected properly.
• Ensure that input setting for TV is set correctly.
• Check if external equipment is on.
• Select same channel and source on TV as on player.
• Check if LCD is on. Also make sure AV switch is set to AV OUT.
• Ensure that equipment is connected properly.
• If using a HiFi amplifi er, try another audio source.
• Check Volume adjustment.
• Ensure that input settings for your TV and stereo system are correct.
• No sound is heard during Pause mode.
• Check digital connections.
• Check Audio Setup menu to make sure that "SPDIF/RAW" or "SPDIF/PCM" is selected.
• Check if the audio format of the selected audio language matches your receiver
capabilities.
• Check disc for fi ngerprints and clean with a soft cloth, wiping from center to edge.
• Sometimes a small amount of picture distortion may appear. This is not a malfunction.
• Disc format does not match TV format (PAL/NTSC).
• Picture will be somewhat distorted at times. This is normal.
• Some discs may have sections which prohibit Forward/Reverse Scan.
• Choose the correct "TV Type" setting in the Setup menu.
• Make sure battery is installed with correct polarities (+ and –).
• Battery is depleted: replace with new one.
• Point remote control at signal sensor.
• Operate remote control within 20 feet of signal sensor.
• Remove obstacles between remote control and signal sensor.
• Power unit off and on. Alternatively, turn off unit, unplug power cable and plug it back in.
(Player may not be operating properly due to lightning, static electricity or some other
external factor.)
• Parental Control function may be set. Confi rm the "Parental Ctrl" setup.
• If audio sound track and/or subtitle language are not available on the disc, language
selected in Setup menu will not be seen/heard.
• Subtitles not available on all discs.
• Subtitles are available but turned off. Press Subtitle to display the subtitles.
• Only one language is available.
• Depends on software availability. Even if a disc has a number of angles recorded, these
angles may be recorded for specifi c scenes only.
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp7240

Table of Contents