Honda TRX420TE Owner's Manual page 197

Emergency Wheel Removal/Installation
Refer to Saf ety Precautions
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
2. Raise the front (or rear) wheels off the ground and place a support
block under the vehicle.
3. Remove the wheel nuts ( ).
4. Remove the wheel.
Avoid getting grease, oil, or dirt on the front brake disc or pad surfaces
when removing and installing each wheel. Any contamination can
cause poor brake performance or rapid pad wear after reassembly.
If You Have a Flat Tyre
on page 89 .
(1) (2)
(2) wheel rim
1
Taking Care of the Unexpected
(1)
189