1.
Park the ATV on level ground.
2.
Place an oil drain pan under the oil drain plug ( ).
3.
Remove the oil filler cap ( ) and the drain plug.
4.
After the oil has completely drained, reinstall the drain plug and
tighten it to the specified torque:
12 N·m (1.2 kgf·m , 9 lbf·ft)
5.
Fill the gear case with the recommended oil.
75 cm (2.5 US oz , 2.6 Imp oz)
6.
Remove the oil level check bolt ( ). Make sure the oil level reaches
the oil level check hole ( ).
7.
Install the oil filler cap and oil level check bolt.
REAR
(4)
(1) oil drain plug
(2) oil filler cap
2
3
4
(3)
Gear Case Oil
1
(2)
(3) oil level check bolt
(4) oil level check hole
Servicing Your Honda
(1)
115