Blaupunkt LUGANO RCR 87 Operating Instructions Manual page 6

8 SC / SRC
SRC (source)
Press SC/SRC briefly –
You can switch between the radio and
tape audio sources (if a tape is insert-
ed).
SC - Preset Scan
Press SC/SRC for approximately
1 sec. until you hear a beep.
"SCAN" and the name or frequency of
the scanned station will appear alter-
nately in the display.
The unit will scan all of the stations
stored on the preset buttons.
To stop Preset Scan:
Press SC/SRC again for approximately
1 sec.
9 AF /TA
TA (Traffic Announcement)
If "TA" lights up in the display, the sys-
tem will play traffic stations only.
Priority on/off: Press AF/TA briefly.
AF - Alternative frequency during RDS
operation:
If "AF" lights up in the display, the
system will automatically seek a fre-
22
quency offering better reception for the
same RDS programme.
AF on/off: Press AF/TA for approxi-
mately 1 sec.
: 1, 2, 3, 4, 5 - preset buttons
You can store five stations on each of
the FM memory banks I, II and T.
On MW(AM)/LW(L), you can also store
five stations each (only with Milano
RCR 127, San Marino RCR 127) .
To store a station: Press a preset
button during radio operation and hold
it down until the set resumes play after
the muting and you hear a beep.
To recall a station: Select the desired
memory bank and press the relevant
preset button briefly.
Extra function of preset buttons
Coding: Please read first the informa-
tion in the section on "Theft protec-
tion".
Button 1, 2, 3, 4 - to enter the four-digit
code number.
Press each button as many times as
necessary until the four-digit code not-
ed in your car radio pass appears in
the display.
; Reversing the tape /
Fast winding
Reversing the tape
Press both buttons at a time.
"TR 1" or "TR 2" will be displayed.
Fast winding
FR : fast rewind, press FF to stop
FF : fast forward, press FR to stop
< Cassette loading slot
Insert the tape with side A or 1 facing
up, the open side showing to the right.
= Cassette ejection
Press .