Advertisement
This appliance complies with the follo-
;
wing EU directives:
• 73/23/EWG dated 19.02.1973 –
Low Voltage Directive
• 89/336/EWG dated 03.05.1989
(including Directive Amendment 92/
31/EWG) – EMC Directive
Using for the First Time
0 Fit the floor nozzle (Figure 3).
0 To open out the handle, you must push
the handle button (Figure 4/C).
0 Plug into the mains socket.
0 Put the appliance into operation by
pressing the On/Off switch (Figure 5/A).
Press the button to remove the floor
3
nozzle (Figure 3).
Changing the Filters
1. Paper Filter
0 Open the bag compartment and
remove the lid (Figure 7).
0 Remove the paper filter (Figure 8).
Bags full of normal household dust
2
may be disposed of with household
rubbish. If necessary, wipe out the filter
compartment with a damp cloth.
0 Place the new paper filter on the filter
carrier (Figure 9).
2. MICROFILTER
Please note: The MICROFILTER must
1
also be replaced every fifth paper
filter change (Figure 10) to maintain
optimum suction performance.
By renewing the MICROFILTER in
good time you will ensure good
suction performance and reduce the
amount of time spent vacuuming.
0 Insert the lid into the appliance and
close by pressing it into place
(Figure 11).
Please use original Electrolux paper
1
filters, or paper filters that carry the
Electrolux quality seal. They guarantee
high suction performance and reliabi-
lity.
Paper filters can be obtained from
specialist retailers under E No.
900 084 290 or from Electrolux custo-
mer service under ET No. 109 990 106.
The guarantee is void in the event of
damage if you use other paper filters.
Every packet of original size 6 Electro-
lux paper filters contains 10 paper
filters and 2 MICROFILTERS.
Using the Floor Nozzle
For the daily care of carpets and hard
floors.
The floor nozzle is suitable for univer-
sal use in the daily vacuuming of
carpets and hard floor coverings such
as parquet, tiles, linoleum, etc. without
the need to switch the nozzle manu-
ally. The four rollers and two large
wheels at the rear make the appliance
easy to manoeuvre. The additional
rotating joint makes your vacuum
cleaner particularly agile.
The rollers ensure that the separation
between the floor and underside of the
nozzle is always constant – this makes
it possible to vacuum hard floors
without problems.
Converting into a Handheld
Appliance / Using the Crevice
Nozzle
The vacuum cleaner is also easy to use
as a handheld appliance.
0 Fold down the handle (Figure 4/C).
0 Remove the floor nozzle (Figure 3) and
fit the crevice nozzle (Figure 6).
g
5
Advertisement
