Electrolux EWF 840 Instruction Booklet page 10

The duration is calculated automatically on the basis
of the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining
is updated every minute.
Delayed start
The selected delay (23 hours max) set by means
of the relevant button appears on the display for
3 seconds, then the duration of the previously
selected programme is displayed.
The countdown is updated every hour.
Incorrect option selection
If an option which is not compatible with the set
wash programme is selected, the message Err is
displayed for 2 seconds.
Alarm codes
In the event of operating problems, some alarm
codes can be displayed, for example E20 (see
paragraph "Something not working").
End of programme
When the programme has finished a flashing zero is
displayed.
8 START/PAUSE button
This button has two functions:
Start – Pause.
After having selected the required programme,
press this button to start the machine; the
corresponding pilot light stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the
programme or the delay appears on the display.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts start to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
10
Start
Pause