Start/Reverse Button; Reverse (Rvs) Switch; Cruise Control Switches - Honda 2009 GOLDWING GL1800 Owner's Manual

Start/Reverse Button

The start/reverse button is used for starting the engine. Pushing the start/reverse
button in starts the engine. See
When the start/reverse button is pushed, the starter motor will crank the engine;
the headlight will automatically go out, but the taillight will stay on.
The starter motor will not operate if the engine stop switch is in the OFF
position when the start/reverse button is pushed.
The start/reverse button is also used for reverse riding. See
page 78 .

Reverse (RVS) Switch

The reverse switch is used to shift into reverse gear so you may back up your
motorcycle. For instructions, see

Cruise Control Switches

Three switches are used to activate, adjust, and de-activate the cruise control
system: a CRUISE CONTROL master switch, a SET/DECEL switch, and a
RESUME/ACCEL switch. For operating instructions, see
Control, page 93
Starting Procedure,
Riding in Reverse,
.
Controls & Features
page 74 .
Riding in Reverse,
page 78 .
Riding with Cruise
Instruments & Controls
39