Honda 2009 GOLDWING GL1800 Owner's Manual page 234

If You Have a Flat Tire
,
, : (Models not equipped with Preminum Audio)
, : (Models equipped with Preminum Audio)
Installation
1. Reassemble the removed parts in the reverse order of removal.
2. Tighten the rear wheel nuts to the specified torque:
80 lbf·ft (108 N·m , 11.0 kgf·m)
3. After installing the wheel, apply the brake several times and then check if the
wheel rotates freely. Recheck the wheel if the brake drags or if the wheel
does not rotate freely.
4. Operate the brake pedal and check the brake operation.
5. Inspect the brake system (page
If a torque wrench was not used for installation, see your Honda dealer as
soon as possible to verify proper assembly. Improper assembly may lead to
loss of braking capability.
228
Taking Care of the Unexpected
,
184 ).
,