Jasco 45246 User Manual page 12

12
1. Plug the AC adapter for the Wireless Receiver
(labeled 'Receiver') into the power jack (marked
'DC 9V' on the back of the receiver), then into an
AC outlet. Select the desired channel on the back
of the receiver (see Receiver Channel Selection).
2. After selecting the channel for the camera (see
Channel Selection). Plug the AC adapter for the
camera (labeled 'Camera') into cable coming from
the camera. Plug the AC adapter into an AC outlet.
3. Locate the AV cable. It has a 3.5mm male plug
at one end, and two RCA plugs at the other end.
Connect the 3.5mm male to the rear jack of the
receiver, marked 'A/V Out'. Connect the other
ends (white/yellow) to your television's A/V inputs.
Match the yellow plug to the yellow VIDEO IN jack
and the white plug to the white AUDIO IN jack.
4. Rotate the antenna, on the receiver, to a vertical
position. Place the receiver either on top of or
near to your TV monitor.
5. Set your TV to monitor the VIDEO INPUT
designated for the Receiver.
6. Place camera near desired location and check
quality of transmitted image on the monitor.