Error Codes - HP Wireless Barcode Scanner User Manual

INDICATION
Label Programming Mode
Acceptance of Partial Label
Label Programming Mode
Acceptance of Programming
Label Programming Mode
Cancel Item Entry

Error Codes

Upon startup, if the scanner sounds a long tone, this means the scanner has not passed its automatic
Selftest and has entered FRU (Field Replaceable Unit) isolation mode. If the scanner is reset, the
sequence will be repeated.
The following table describes the LED flashes/beep codes associated with an error found.
Number of LED Flashes/Beeps
1
2
6
12
15
DESCRIPTION
In cases where multiple
labels must be scanned to
program one feature, this
indication acknowledges
each portion as it is
successfully scanned.
Configuration option(s) have
been successfully
programmed via labels and
the scanner has exited
Programming Mode.
Cancel label has been
scanned.
Error
Configuration
Interface PCB
Digital PCB
Imager
Accelerometer
LED
N/A
N/A
N/A
Corrective Action
Contact Help desk for assistance
Contact Help desk for assistance
Contact Help desk for assistance
Contact Help desk for assistance
Contact Help desk for assistance
BEEPER
Scanner sounds one short
beep at highest frequency
and current volume.
Scanner sounds one high
frequency beep and 4 low
frequency beeps followed by
reset beeps.
Scanner sounds two times at
low frequency and current
volume.
Error Codes 31