Led And Beeper Indications - HP Wireless Barcode Scanner User Manual

LED and Beeper Indications

The scanner's beeper sounds and its LED illuminates to indicate various functions or errors on the
scanner. An optional "Green Spot" also performs useful functions. The following tables list these
indications. One exception to the behaviors listed in the tables is that the scanner's functions are
programmable, and so may or may not be turned on. For example, certain indications such as the
power-up beep can be disabled using programming bar code labels.
Indicator
Power-up Beep
Good Read Beep
ROM Failure
Limited Scanning Label
Read
Scanner Active Mode
Scanner Disabled
Green Spot 1
momentarily
Image Capture
1 Except when in sleep mode or when a Good Read LED Duration other than 00 is selected
Programming Mode - The following indications ONLY occur when the scanner is in Programming
Mode.
INDICATION
Label Programming Mode
Entry
Label Programming Mode
Rejection of Label
30 Appendix B Technical Specifications
Description
The scanner is in the
process of powering-up.
A label has been
successfully scanned by the
scanner.
There is an error in the
scanner's software/
programming.
Indicates that a host
connection is not
established.
The scanner is active and
ready to scan.
The scanner has been
disabled by the host.
flashes Upon successful read of a
label, the software shall turn
the green spot on for the
time specified by the
configured value.
When ready to capture
image.
DESCRIPTION
A valid programming label
has been scanned.
A label has been rejected.
LED
N/A
LED behavior for this
indication is configurable via
the feature "Good Read:
When to Indicate" (see the
HP Wireless Barcode
Scanner Programming
Reference Guide for
information).
Flashes
N/A
The LED is lit steadily 1
The LED blinks continuously
N/A
Blue light flashes 2 times
when updating
LED
LED blinks continuously
N/A
Beeper
Scanner beeps four times at
highest frequency and
volume upon power-up.
The scanner will beep once
at current frequency, volume,
mono/bitonal setting and
duration upon a successful
label scan.
Scanner sounds one error
beep at highest volume.
Scanner 'chirps' six times at
the highest frequency and
current volume.
N/A
N/A
N/A
N/A
BEEPER
Scanner sounds four low
frequency beeps.
Scanner sounds three times
at lowest frequency and
current volume.