General Problems - Miele for dishwashers Operating Instructions Manual

Problem solving guide

General problems

Problem
The indicators and
time display are dark.
Only the Start/Stop
indicator light is
flashing slowly.
Detergent residue is
left in the dispenser at
the end of a
programme.
The detergent
dispenser lid cannot
be closed properly.
At the end of a
programme there is a
film of moisture on the
inside of the door and
possibly the interior
walls.
Water remains in the
wash cabinet at the
end of a programme.
58
Possible cause
The indicators and the
time display have switched
off automatically to save
energy (Standby mode).
The dispenser was still
damp when detergent was
added.
Clogged detergent residue
is blocking the catch.
This is caused by the
drying system and does
not indicate a fault.
The filter combination in
the wash cabinet is
clogged.
The drain pump or
non-return valve may be
blocked.
The drain hose is kinked.
Remedy
Press the On/Off button K.
This switches Standby off.
Make sure the dispenser is
dry before adding
detergent.
Clean the detergent from
the catch.
The moisture will dissipate
after a while.
Before rectifying the
problem:
– Switch the dishwasher
off using the On/Off
button K.
Clean the filter
combination. See
"Cleaning and care".
Clean the drain pump or
the non-return valve. See
"Maintenance".
Remove any kink from the
drain hose.