Symbol US AUTOMATION EP-1 User Manual page 13

Table of Contents

The following are valid barcode formats for JSN / Part number mode.

Parts Bin

10020099

0099

10020099

NOTE:

It is required that you use at least 5 digits for the JSN portion of the barcode which would be

99999 jobs before a roll over of job sequence numbers occurs.

NOTE:

When using the JSN mode or the JSN/Part number, remember that there will be a JSN Error on

your first scan because no previous numbers are on record. The error should not reappear unless the

JSN scanned is out of order.

Dual JSN: Check this box if you have 2 (dual) Job Sequence Numbers (JSN). An example of a dual JSN

would be a left and right side part of a car, or a front and rear bumper. This mode cannot be used with the Part

Number mode. If you are error proofing Job Sequence Numbers and you have pairs of parts like a right and left

door, you must check the Dual JSN option. If you don't check the Dual JSN option and scan two of the same

part numbers in a row, you will receive a Back to Back Parts Bin Error or a Back to Back Part Number Error,

depending on which barcode you scan.

OPTIONAL, you should only select the item if you need it.

Pick Ticket

10003001.10020099

3001.0099

10003001.10020099

10003001.0099

10003001.20099

03001.099

Table of Contents