Table of Contents
Advertisement
Click "Change" to configure the Access Point mode settings.
Parameters
Channel
Basic Rate
SSID
Hide SSID
Apply
WEP
Authentication
Mode
Description
Select the channel you want to use.
Select the applicable transfer rate.
Enter the desired SSID for the access point.
Check to disable ESSID broadcast function.
After click "Change" button, the name of this button will become
"Apply". Please click "Apply" to submit the changes.
You may select "Enable" and refer to section 4.2 to configure
the settings after click "Setting" button.
Open System: With the same WEP key between the stations,
the stations don't need to be authenticated, and
this algorithm was set to default.
Shared Key: With the same WEP key between the stations in
this Authentication algorithm, this type will use
packets
challenge text which will be acknowledge by both
side of the stations. In order to choose which
authentication algorithm will be used, you must
with
encryption
21
by
transferring
a
Advertisement
Table of Contents
